RV-200 Helical Drive Head

PierTech lists output speeds at both theoretical and actual. Actual torque numbers are NOT listed at 100% efficiency. Maximum efficiencies have been applied to the torque and speed charts according to the manufacturer’s recommendations. Speed and torque output are dependent on the overall system efficiencies associated with the prime mover’s hydraulic system. When the purchaser is determining criteria for specific applications please contact PierTech. PierTech has made every attempt to present accurate and suitable information published in this document. This document should be used for information and comparative purposes only. When application-specific information is required, please contact PierTech.

Features

  • Large highly efficient gearboxes, designed specifically for long duty cycles.
  • Standard cross-over pressure relief systems to protect the motor from pressure spikes.
  • Two-piece bail housing design allows top section to be removed for easy motor access.
  • Single and two-speed models do not require drain lines.
  • All models are designed to be outfitted with PierTech TruLink® torque monitoring system.
  • All two-speed models are equipped with a pressure activated auto shift feature.
  • PROVIDE ACCURATE TORQUE AND SPEED SPECIFICATIONS PierTech ensures that all torque and speed specifications have maximum efficiencies applied to provide the most accurate specifications possible.

Complete System

PierTech offers a complete Drive package which includes:

  • Mounting brackets for:
    – Skid Loaders
    – Backhoe Loaders
    – Excavators (Compact & Large)
  • Anchor drive tool adapters
  • TruLink® digital torque monitoring system

Applications

PierTech offers a complete Drive package which includes:

  • DRILLING The DS, DT, and DV series are ideal for various types of drilling applications. Torque ranges from 2,500 ft/lb to 40,000 ft/lb.
  • ANCHORING The RS, RT, and RV models are designed specifically for the anchor installation industry. The high torque and slow speed configuration is ideal for anchor applications.

See It In Action

Specifications

REFERENCE TORQUE CHART (LT / HS)
Pressure (psi)THEORETICAL Torque (ft/lb)ACTUAL Torque (ft/lb)
25006431265608
26006688568233
27006945770857
28007203073481
29007460276105
REFERENCE TORQUE CHART (HT / LS)
Pressure (psi)THEORETICAL Torque (ft/lb)ACTUAL Torque (ft/lb)
3100150026124522
3200154866128539
3300159706132556
3400164545136572
3500169385140590
4000193583160674
4500217780180757
5000241978200842
HYDRAULIC MOTOR INFORMATION
Displacement13.73 cu/in (225cc)
Motor TypeVariable Speed Bi-Directional
Motor Output Shaft13T 8/16 Spline
Motor MountSAE – E 4 Bolt
Motor PortsCode 62 SAE Split Flange
Cross Over Pressure ReliefNA
PLANETARY GEARBOX INFORMATION
Gearbox TypePlanetary Four Stage
Reduction Ratio265.64:1
Output Shaft177mm Square
Internal Oil Capacity14 Gallons
Oil TypeSAE 80W90 GL-5
Shaft Pull Out (lbs.)250,000
REFERENCE SPEED CHART
Flow GPM (Liter)Low (rpm)High (rpm)
80 (302)64
90 (370)75
100 (378)85
110 (416)96
120 (454)107

To find out more about our hand-held helical drives, please contact our equipment advisors.