RT-9 Helical Drive Head

PierTech lists output speeds at both theoretical and actual. Actual torque numbers are NOT listed at 100% efficiency. Maximum efficiencies have been applied to the torque and speed charts according to the manufacturer’s recommendations. Speed and torque output are dependent on the overall system efficiencies associated with the prime mover’s hydraulic system. When the purchaser is determining criteria for specific applications please contact PierTech. PierTech has made every attempt to present accurate and suitable information published in this document. This document should be used for information and comparative purposes only. When application-specific information is required, please contact PierTech.

Features

  • Large highly efficient gearboxes, designed specifically for long duty cycles.
  • Standard cross-over pressure relief systems to protect the motor from pressure spikes.
  • Two-piece bail housing design allows top section to be removed for easy motor access.
  • Single and two-speed models do not require drain lines.
  • All models are designed to be outfitted with PierTech TruLink® torque monitoring system.
  • All two-speed models are equipped with a pressure activated auto shift feature.
  • PROVIDE ACCURATE TORQUE AND SPEED SPECIFICATIONS PierTech ensures that all torque and speed specifications have maximum efficiencies applied to provide the most accurate specifications possible.

Complete System

PierTech offers a complete Drive package which includes:

  • Mounting brackets for:
    – Skid Loaders
    – Backhoe Loaders
    – Excavators (Compact & Large)
  • Anchor drive tool adapters
  • TruLink® digital torque monitoring system

Applications

PierTech offers a complete Drive package which includes:

  • DRILLING The DS, DT, and DV series are ideal for various types of drilling applications. Torque ranges from 2,500 ft/lb to 40,000 ft/lb.
  • ANCHORING The RS, RT, and RV models are designed specifically for the anchor installation industry. The high torque and slow speed configuration is ideal for anchor applications.

See It In Action

Specifications

REFERENCE TORQUE CHART (LT / HS)
Pressure (psi)THEORETICAL Torque (ft/lb)ACTUAL Torque (ft/lb)
100020021642
120024021970
140028022298
160032038686
180036038954
200040043283
220044043611
240048053940
260052054268
280056054596
300060064925
REFERENCE TORQUE CHART (HT / LS)
Pressure (psi)THEORETICAL Torque (ft/lb)ACTUAL Torque (ft/lb)
100040043283
120048053940
140056054596
160064065253
180072075910
200080086567
220088097223
240096107880
2600104108536
2800112119193
3000120129850
HYDRAULIC MOTOR INFORMATION
Displacement11.9 cu/in (195cc)
Motor TypeTwo Speed Bi-Directional
Motor Output Shaft1 1/4″ Spline 14T
Motor MountSAE – C 4 Bolt
Motor Ports1 5/8″ – 12-UN-2B
Cross Over Pressure ReliefSet at 3100 PSI
PLANETARY GEARBOX INFORMATION
Gearbox TypePlanetary Two Stage
Reduction Ratio25.36:1
Output Shaft2 1/2″ Hex
Internal Oil Capacity2.0 Gallons
Oil TypeSAE 80W90 GL-5
Shaft Pull Out (lbs.)22,500
REFERENCE SPEED CHART
Flow GPM (Liter)Low (rpm)High (rpm)
20 (75)1325
30 (113)1938
40 (151)2550
50 (190)3163

To find out more about our hand-held helical drives, please contact our equipment advisors.