MS-100 Helical Drive Head

PierTech lists output speeds at both theoretical and actual. Actual torque numbers are NOT listed at 100% efficiency. Maximum efficiencies have been applied to the torque and speed charts according to the manufacturer’s recommendations. Speed and torque output are dependent on the overall system efficiencies associated with the prime mover’s hydraulic system. When the purchaser is determining criteria for specific applications please contact PierTech. PierTech has made every attempt to present accurate and suitable information published in this document. This document should be used for information and comparative purposes only. When application-specific information is required, please contact PierTech.

Features

  • Large highly efficient gearboxes, designed specifically for long duty cycles.
  • Standard cross-over pressure relief systems to protect the motor from pressure spikes.
  • Two-piece bail housing design allows top section to be removed for easy motor access.
  • Single and two-speed models do not require drain lines.
  • All models are designed to be outfitted with PierTech TruLink® torque monitoring system.
  • All two-speed models are equipped with a pressure activated auto shift feature.
  • PROVIDE ACCURATE TORQUE AND SPEED SPECIFICATIONS PierTech ensures that all torque and speed specifications have maximum efficiencies applied to provide the most accurate specifications possible.

Complete System

PierTech offers a complete Drive package which includes:

  • Mounting brackets for:
    – Skid Loaders
    – Backhoe Loaders
    – Excavators (Compact & Large)
  • Anchor drive tool adapters
  • TruLink® digital torque monitoring system

Applications

PierTech offers a complete Drive package which includes:

  • DRILLING The DS, DT, and DV series are ideal for various types of drilling applications. Torque ranges from 2,500 ft/lb to 40,000 ft/lb.
  • ANCHORING The RS, RT, and RV models are designed specifically for the anchor installation industry. The high torque and slow speed configuration is ideal for anchor applications.

See It In Action

Specifications

REFERENCE TORQUE CHART
Pressure (psi)THEORETICAL Torque (ft/lbACTUAL Torque (ft/lb)
1200560459
1400654536
1600747613
1800840689
2000934766
22001027842
24001121919
26001308995
280025501073
300027331149
HYDRAULIC MOTOR INFORMATION
Displacement10.06 cu/in (165cc)
Motor TypeSingle Speed Bi-Directional
Motor Output Shaft7/8″ Spline 14T
Motor MountSAE – A 2 Bolt
Motor Ports1/2″ BSP
Cross Over Pressure ReliefNot Equipped
PLANETARY GEARBOX INFORMATION
Gearbox TypePlanetary Single Stage
Reduction Ratio5.77:1
Output Shaft2″ Hex or 2 9/16″ Round
Internal Oil Capacity.13 Gallons
Oil TypeSAE 80W90 GL-5
REFERENCE SPEED CHART
Flow GPM (Liter)Speed (rpm)
10 (38)54
15 (56)80
20 (75)108
25 (94)134

To find out more about our hand-held helical drives, please contact our equipment advisors.